Connecting to Your Wi-Fi
Your thermostat is an American Standard XL850 (model TCONT850). As a new owner, you'll need to connect it to your home Wi-Fi before you can use the app for remote control.
Step 1 — Connect the thermostat to your Wi-Fi
- From the home screen, tap Menu
- Tap Settings
- Tap Wi-Fi
- The thermostat will scan and display available networks — tap your network name
- Enter your Wi-Fi password using the on-screen keyboard, then tap Connect
- A Wi-Fi signal icon will appear in the top-right corner of the display when the connection is successful
Step 2 — Link to the Trane Home / American Standard Home app
- On the thermostat, tap Menu > Smart Home
- Follow the on-screen prompts to register the thermostat with your account
- In the American Standard Home app, tap Add Device and complete the pairing
- Once linked, you can control temperature, schedules, and modes from your phone
💡 Tip
If the thermostat was previously registered to the prior owner's account, it must be removed from that account first. Contact American Standard Home support if the device appears claimed and you cannot add it.
Setting Up the App
Your thermostat is controlled by the American Standard Home app (powered by the "Home" platform). Download it from the App Store to control your system from anywhere.
- Open the App Store on your iPhone and search for "American Standard Home"
- Download and install the free app
- Tap Create Account and register with your email address
- Follow the in-app prompts to connect to your home's Wi-Fi thermostat
- Once connected, set a 4-digit PIN — you'll enter this each time you open the app
- Your home will appear as "My Home" on the main dashboard
Controlling Temperature
The main dashboard shows your current indoor temperature and lets you set both a cooling and heating target.
❄️ Cooling Setpoint
Blue circle
Use ∧ ∨ arrows to adjust
A/C runs when temp rises above this
A/C runs when temp rises above this
🔥 Heating Setpoint
Orange circle
Use ∧ ∨ arrows to adjust
Heat runs when temp drops below this
Heat runs when temp drops below this
💡 Good to know
The app also shows outdoor temperature, indoor humidity, and compressor activity — handy for monitoring system performance.
System Modes
Tap the Auto button (with the house/wave icon) on the main screen to open System Mode. Choose from:
Auto
Automatically switches between heating and cooling as needed. Recommended for daily use.
Cooling
A/C only — use in warm months when you want cooling but no heat.
Heating
Heat only — use in winter when you only need the furnace.
Off
System completely off. Fan won't run. Use only when leaving for extended periods.
📅 Schedules & Fan
The Fan button (also on the dashboard) lets you set fan to Auto (runs only with heating/cooling) or On (runs continuously for air circulation). Tap Schedules at the bottom of the app to set temperature programs by time of day.
The Fan button (also on the dashboard) lets you set fan to Auto (runs only with heating/cooling) or On (runs continuously for air circulation). Tap Schedules at the bottom of the app to set temperature programs by time of day.
Changing the Air Filter
Filter Brand
Honeywell Home
Model FC100A1029
Filter Size
16 × 25 × 4
Actual: 15-15/16″ × 24-7/8″ × 4-3/8″
Change Frequency
Every 3 months
Set a phone reminder to stay on track
Where to Buy
Home Depot
Amazon, Lowe's, or HVAC supply stores
How to change the filter:
- Turn the thermostat system to Off before changing the filter
- Locate the filter housing on your furnace/air handler unit
- Open the cover panel and slide out the old filter
- Check the airflow arrow printed on the new filter — it must point toward the furnace/blower (away from the return air duct)
- Slide in the new Honeywell Home 16×25×4 filter and close the panel
- Turn the system back on
⏰ Set a Reminder
Add a repeating reminder to your phone every 3 months — January, April, July, October works well. A dirty filter reduces efficiency and can cause the system to overheat.
General Tips
- Keep vents clear — make sure furniture and rugs don't block supply or return air vents throughout the house
- Annual service — schedule a professional HVAC tune-up once a year, ideally in spring before heavy A/C use
- Use schedules — program the app to set back temperatures at night or when away to save on energy bills
- RoomIQ™ feature — the system includes RoomIQ™ sensor technology for more even room-by-room comfort; check the app's Settings for configuration options
- Check humidity — the app displays indoor humidity. Ideal range is 35–50%. If consistently high, a dehumidifier setting may help
- If the system won't start — check that the thermostat is set to the correct mode, the filter isn't clogged, and the circuit breaker for the HVAC unit is on